BEYIMEI PCI-E 1X to 16X VER010-X Riser Card with M.2 to PCI-E X1 NGFF Slot Adapter Card,for Bitcoin Crypto Mining Ethereum Mining
Product name: PCI-E 1XTO 16X + M.2 to PCI-E riser card
Product interface: PCI-E 1X / PCI-E 16X
USB 3.0 adapter cable length: 62CM
Support system: Compatible with all WINDOWS systems, LINUX MAC
PCI-E 1XTO 16X Riser card size: 12.3 cm x 4.5 cm x 0.5 cm
Note: 1.) It is recommended to use the old cable for dual core graphics cards, and it is also recommended to use the old cable for 16X motherboards.
2.) The internal cable is specially made. Please do not replace them with other cables.
3.) Please identify the plug-in direction at the slot to avoid a burning device.
4.) The USB3.0 interface on the adapter card is a PCI-E Signal, no USB signal. Do not connect any USB devices.
5.) Since some new mainboards are generally GEN3 as standard, the graphics card is not recognized or an exclamation mark is displayed! For the new motherboard, we have found that it is necessary to make appropriate settings in the BIOS, set the PCI-E 16X speed in the BIOS to GEN2 / GEN1, GEN2 recommended, and it can be used normally.
Customer service and technical support:
If you have any questions before your purchase or after you receive the product, please contact us in the first time, we will do our best to solve the problem for you!
Package contents :
1 * PCI-E riser card.
1 * PCI-E 1X adapter card.
1 * M.2 to PCI-E riser card.
1 * 60 cm USB 3.0 riser Cable.
1 * Small screwdriver.
Additional information
Additional information
Weight | 0.16 kg |
---|
BEYIMEI PCI-E 1X to 16X VER010-X Riser Card with M.2 to PCI-E X1 NGFF Slot Adapter Card,for Bitcoin Crypto Mining Ethereum Mining
Description
- 【PCI-E 1X to 16X riser card】—VER010-X version, a high-performance PCI Express riser card, which can extend the motherboard PCIE X1 slot to the PCIE X16 slot. Mainly designed for Ethereum/Bitcoin mining equipment or more GPU mining equipment.
- 【M.2 NGFF to PCIe Riser Card】— Use this riser card to convert the M.2 NGFF interface to a normal PCIe1X interface. There are 4 fixed holes on the board, 22*30, 22*42mm, 22*60mm, 22*80mm
- 【Note】— The USB3.0 interface on the M.2 to NGFF adapter card is a PCI-E signal, not a USB signal, and USB devices cannot be connected.
- 【Easy installation】— Plug and play, no driver is required for installation. The PCI-E card can be inserted into any PCI-E slot: x1, x4, x8 or x16. The USB 3.0 transfer cable can flexibly place your PCI-E devices.
- 【Support System】— Compatible with all WINDOWS systems, LINUX, MAC.
USBtype-Aポートがあるので、USBtype-Cポートが使えなくても別に問題はないのですが、せっかくあるなら使ってみたかった!という目的のみで組み込みました。
まあ、ほかの方はしないと思いますが、私のM/Bの場合x1用が正解なのに画像だけ適当に見てx2用を最初買ってしまいお蔵入り・・・文字はきちんと読まないとダメですね。きっと私だけですが両方の画像を反省の意味も込めて貼っておきます。
USBtype-Aポートがあるので、USBtype-Cポートが使えなくても別に問題はないのですが、せっかくあるなら使ってみたかった!という目的のみで組み込みました。
まあ、ほかの方はしないと思いますが、私のM/Bの場合x1用が正解なのに画像だけ適当に見てx2用を最初買ってしまいお蔵入り・・・文字はきちんと読まないとダメですね。きっと私だけですが両方の画像を反省の意味も込めて貼っておきます。
USBtype-Aポートがあるので、USBtype-Cポートが使えなくても別に問題はないのですが、せっかくあるなら使ってみたかった!という目的のみで組み込みました。
まあ、ほかの方はしないと思いますが、私のM/Bの場合x1用が正解なのに画像だけ適当に見てx2用を最初買ってしまいお蔵入り・・・文字はきちんと読まないとダメですね。きっと私だけですが両方の画像を反省の意味も込めて貼っておきます。
USBtype-Aポートがあるので、USBtype-Cポートが使えなくても別に問題はないのですが、せっかくあるなら使ってみたかった!という目的のみで組み込みました。
まあ、ほかの方はしないと思いますが、私のM/Bの場合x1用が正解なのに画像だけ適当に見てx2用を最初買ってしまいお蔵入り・・・文字はきちんと読まないとダメですね。きっと私だけですが両方の画像を反省の意味も込めて貼っておきます。
This connector has the noticeably high data throughput in tests with image and video transfer whilst still allowing you to do the more mundane chores like charge things up.
The outer casing is metal which, apart from making it more rugged, appears to be a requirement for the high data transfer rates that the new standards need.
These connectors and rugged and get the job done.
This connector has the noticeably high data throughput in tests with image and video transfer whilst still allowing you to do the more mundane chores like charge things up.
The outer casing is metal which, apart from making it more rugged, appears to be a requirement for the high data transfer rates that the new standards need.
These connectors and rugged and get the job done.
mini pic
, this is purely a convenience factory for me, as I was finding it constantly awkward to be swapping flash drives from the ports on the rear (there are plenty, they're just more awkward to access than the front ports with how I have my desk. I didn't particular need speed but I did need convenience, and it's so much neater with this being rigid and not having yet another dangling wire like some of the other C based docks. The anodised aluminium finish matches my mini pc exactly too, feels very swish!
mini pic
, this is purely a convenience factory for me, as I was finding it constantly awkward to be swapping flash drives from the ports on the rear (there are plenty, they're just more awkward to access than the front ports with how I have my desk. I didn't particular need speed but I did need convenience, and it's so much neater with this being rigid and not having yet another dangling wire like some of the other C based docks. The anodised aluminium finish matches my mini pc exactly too, feels very swish!
Materiali ottimi simili allo stile Apple.
Lo utilizzo quotidianamente e mi trovo benissimo, ne ho provati molti e questo è il migliore.
Per il prezzo vale ogni centesimo.
Prodotto consigliato
Eric Newman
(verified owner)edward
(verified owner)enzo dalterio
(verified owner)Moises
(verified owner)Luis Enrique
(verified owner)Franz
(verified owner)ciccomel
(verified owner)らえるいあん
(verified owner)G Deigh
(verified owner)Adi
(verified owner)Christopher J. McDermott
(verified owner)UPDATE: 3/23/2022 – 2nd order flawless, cleaned up my existing rig, replaced all ver6s risers. not a single issue. Will order additional 1/2 dozen soon. Maybe a 4 port pcie card to increase GPU capacity. This Manufacturer takes pride in this product, order this for good results!
マッキー
(verified owner)追加で買ってみて検証します。
追伸 GPU側を他のライザーカードに換えたら安定して稼働できるようになりました。
Amazon カスタマー
(verified owner)Giancky
(verified owner)Carlos Alberto Gomes
(verified owner)Caleb d
(verified owner)Nico
(verified owner)david j wyllie
(verified owner)(there is a SATA, DONT USE SATA TO POWER CARD RISERS)
again
(there is a SATA, DONT USE SATA TO POWER CARD RISERS)
Have fire insurance up-to-date if using any SATA powered GPU risers.
Sancas
(verified owner)seby bella
(verified owner)Nomad
(verified owner)