BEYIMEI M.2 NVME to 4 Ports PCI-E 1X USB 3.0 Riser Card, M.2 B-Key PCI-E Interface for Bitcoin Miner Ethereum Mining
⭐【M.2 NVME to PCIE】: Extend 4 PCIE X1 interfaces through M.2 B+M-KEY PCIE interface, effectively solve the dilemma of insufficient PCI-E interface, mainly used for Ethereum mining equipment or GPU mining equipment.
⭐【M.2 to 4-port PCIE】: The 4-port on the adapter card outputs all PCI-E X1 signals, and cannot be connected to USB devices. For use as mining equipment only.
⭐【Simple Design】: Directly connected to the motherboard without any extension cable, it can be fixed on the chassis, effectively reducing interface interference and cable loss. Ensure data reliability and improve work efficiency.
⭐【Heat Dissipation Design】: The all-aluminum heat sink covers the ASM1184E chip to prevent the chip from overheating and improve stability. The bottom of the mine card is reinforced to protect the product from deformation.
⭐【Operating System】: DOS, Linux, Windows XP/7/8/10/11. If a PCI-E card is inserted, the power must be turned off first.
Additional information
Additional information
Weight | 0.1 kg |
---|
BEYIMEI M.2 NVME to 4 Ports PCI-E 1X USB 3.0 Riser Card, M.2 B-Key PCI-E Interface for Bitcoin Miner Ethereum Mining
Description
Product name: M.2 NVME to USB PCI-E expansion card
Product interface1: M.2 B+M-KEY
Product interface2 : PCI-E X1 interface*4
Compatible systems: DOS, Linux, Windows XP/7/8/10/11
Notice:
⚡The USB interface on the riser card is a PCIE signal, which is specially designed for PC-E expansion card products.
Other USB devices such as USB flash drives, hard disk enclosures, etc. are not suitable for this interface!
⚡Applicable to B KEY or M KEY (only supports PCI-E protocol or NVME protocol, does not support SATA protocol card slot)
⚡This product does not include USB-PCIE cable!
⚡ Products cannot be broken, M.2 slot must support 2280 size
Package:
1*M.2 NVME to PCI-E Riser Card
1* Screw
USBtype-Aポートがあるので、USBtype-Cポートが使えなくても別に問題はないのですが、せっかくあるなら使ってみたかった!という目的のみで組み込みました。
まあ、ほかの方はしないと思いますが、私のM/Bの場合x1用が正解なのに画像だけ適当に見てx2用を最初買ってしまいお蔵入り・・・文字はきちんと読まないとダメですね。きっと私だけですが両方の画像を反省の意味も込めて貼っておきます。
USBtype-Aポートがあるので、USBtype-Cポートが使えなくても別に問題はないのですが、せっかくあるなら使ってみたかった!という目的のみで組み込みました。
まあ、ほかの方はしないと思いますが、私のM/Bの場合x1用が正解なのに画像だけ適当に見てx2用を最初買ってしまいお蔵入り・・・文字はきちんと読まないとダメですね。きっと私だけですが両方の画像を反省の意味も込めて貼っておきます。
USBtype-Aポートがあるので、USBtype-Cポートが使えなくても別に問題はないのですが、せっかくあるなら使ってみたかった!という目的のみで組み込みました。
まあ、ほかの方はしないと思いますが、私のM/Bの場合x1用が正解なのに画像だけ適当に見てx2用を最初買ってしまいお蔵入り・・・文字はきちんと読まないとダメですね。きっと私だけですが両方の画像を反省の意味も込めて貼っておきます。
USBtype-Aポートがあるので、USBtype-Cポートが使えなくても別に問題はないのですが、せっかくあるなら使ってみたかった!という目的のみで組み込みました。
まあ、ほかの方はしないと思いますが、私のM/Bの場合x1用が正解なのに画像だけ適当に見てx2用を最初買ってしまいお蔵入り・・・文字はきちんと読まないとダメですね。きっと私だけですが両方の画像を反省の意味も込めて貼っておきます。
This connector has the noticeably high data throughput in tests with image and video transfer whilst still allowing you to do the more mundane chores like charge things up.
The outer casing is metal which, apart from making it more rugged, appears to be a requirement for the high data transfer rates that the new standards need.
These connectors and rugged and get the job done.
This connector has the noticeably high data throughput in tests with image and video transfer whilst still allowing you to do the more mundane chores like charge things up.
The outer casing is metal which, apart from making it more rugged, appears to be a requirement for the high data transfer rates that the new standards need.
These connectors and rugged and get the job done.
mini pic
, this is purely a convenience factory for me, as I was finding it constantly awkward to be swapping flash drives from the ports on the rear (there are plenty, they're just more awkward to access than the front ports with how I have my desk. I didn't particular need speed but I did need convenience, and it's so much neater with this being rigid and not having yet another dangling wire like some of the other C based docks. The anodised aluminium finish matches my mini pc exactly too, feels very swish!
mini pic
, this is purely a convenience factory for me, as I was finding it constantly awkward to be swapping flash drives from the ports on the rear (there are plenty, they're just more awkward to access than the front ports with how I have my desk. I didn't particular need speed but I did need convenience, and it's so much neater with this being rigid and not having yet another dangling wire like some of the other C based docks. The anodised aluminium finish matches my mini pc exactly too, feels very swish!
Materiali ottimi simili allo stile Apple.
Lo utilizzo quotidianamente e mi trovo benissimo, ne ho provati molti e questo è il migliore.
Per il prezzo vale ogni centesimo.
Prodotto consigliato
Eric Partlow
(verified owner)Omar J. Torres
(verified owner)Totally recommend this and super easy to install plug and play
Ginger456
(verified owner)Amazon Customer
(verified owner)Dan J
(verified owner)Attn4d
(verified owner)Silas Yount
(verified owner)GustavTwiglet
(verified owner)Wojciech Slusarczyk
(verified owner)N. Nguyen
(verified owner)However, be aware not to expect too much from this card:
1. It does not support boot function. If you’re expecting the USB3 ports to boot off USB Drives, not going to happen.
2. It does not use the full 5 gbps, nor even at 2.5 gpbs. I use Samsung T7 Shield 1TB SSD (USB C) connection. Max read at 192 MBps, and max write at 100 MBps. It’s a lot better than the existing onboard USB2 max read at 58MBps and max write at 23MBps.
Rashoxmon’s_Heart
(verified owner)Amazon Customer
(verified owner)Drjeebus
(verified owner)Dustin Clark
(verified owner)These are solid. “Shrug” I used the 4 port for 3 years, been using these for over a year now. Game changer.
Josh smith
(verified owner)Daniel tamayo
(verified owner)Amazon Customer
(verified owner)Thierry SANTOS
(verified owner)mon riser ne marchait plus
cet article a resolu mon probleme
Giovanni
(verified owner)La dissipazione del chip è assicurata dal generoso heatsink posizionato al centro.
susi
(verified owner)Florian
(verified owner)Einbau war kein Problem, alle Karten wurden sofort gefunden. Macht einen guten und stabilen Eindruck. Splitter ist jetzt seit 24h im Einsatz.
Eine Zustands-Led wäre schön gewesen, hatten die 4er Splitter aber auch nicht.
1 Stern Abzug, weil es der Postbote durch den Briefkasten gezwängt hat.
Comfortably Numb
(verified owner)It worked!
Freddy Pichardo
(verified owner)Steve Belcher
(verified owner)Steven Gillespie
(verified owner)Dk11
(verified owner)Amazon Kunde
(verified owner)Ben
(verified owner)Been running for 3 months now with no issues.
Allowed me to free up a few onboard pcie connections.
Armando
(verified owner)Guy
(verified owner)Cliente Amazon
(verified owner)Manuel Veloso
(verified owner)Justin
(verified owner)Capsoudade
(verified owner)Dunya Cukurova
(verified owner)にゃんこ先生
(verified owner)4分岐すべてにグラボを刺して使用しても問題なく、1枚のマザボに2枚の4分岐の使用もしていますが、まったく問題ありません。
4分岐で3090などを使うと発熱するという話もありますが、この商品は触診した感じでは熱くなっている事はありません。とても安定しています。
Joshua V. Miller
(verified owner)Francesco
(verified owner)Adam B.
(verified owner)Amazon Customer
(verified owner)Amazon Customer
(verified owner)Client d’Amazon
(verified owner)Warry
(verified owner)SD Ponder
(verified owner)Christos Chazaridis
(verified owner)Amazon Customer
(verified owner)Amazon Customer
(verified owner)Valerio V.
(verified owner)Gregory.B
(verified owner)Cassao jordane
(verified owner)SouthWest Tactical
(verified owner)goto W
(verified owner)Diego C.
(verified owner)Devinwolfpack74
(verified owner)P. Ng
(verified owner)I used this card with: “Ubit 6 Pack Latest PCI-E Riser Express Cable 16X to 1X (6pin / MOLEX/SATA) with Led Graphics Extension Ethereum ETH Mining Powered Riser Adapter Card+60cm USB 3.0 Cable”.
I am using these on an Alienware R12 with 1 Alienware Nvidia RTX 3080 and 3 smaller misc Nvidia cards and another 3080 connected to the Motherboard and it all worked flawlessly!
You’ll need a second power supply and an optional dual power supply adapater but it all worked perfectly. I was suprised that it worked at all! I was expecting Alienware’s motherboard to not like it or the 3080 not working on a riser but everything worked!
I would recommend this card! It’s cheap and effective. I considered an expansion that had 4x full sized x16 PCIe slots but those seem more risky and untested.
FYI, I think the newest 3060s do not like risers =/ so if you have a new 3060, don’t blame the riser or expansion card until you’ve narrowed down the cause. My 3060 didn’t play well with the risers.
Fili Ainuū
(verified owner)Alex Hui
(verified owner)This adapter has gold coated USB connectors, unlike standard USB connectors on the market. Visible under the light comparing between GPURisers and standard connectors. Competitor’s adapter would lose connection once everyday at least under sustained use.
Heatsink is also more effective and better made than the other adapters – this has more fins and better machined quality than the others. Engineer here, this one is important for chip durability.
Included PCI-E slot bracket is stamped mesh metal, preserving airflow unlike the others that just come with a full bracket and blocks airflow – made a consistent 1 degree difference in my tower with dual GPUs over 24 hours (65-66 C).
The PCB material is also thicker and better printed that it can hang on a PCI-E slot bracket by itself without bending and cracking the printed connections.
Best PCI-E 1-4 adapter as of late June 2021 offered on Amazon. Wish I could get one on the house for leaving this review lol but I’m happy enough with the dramatically superior quality.