BEYIMEI M.2 NGFF to SATA3.0 Adapter Card, Dual M.2 B-Key SSD to 6G Interface Adapter Card, SATA to Dual M.2 SATA 2.5” SSD (JBOD)
- 【NGFF to SATA3.0】Boost the speed of M.2 SSD in any 2.5″ SATA application with the M.2 SSD to SATA adapter and greatly improve system performance.
- 【Faster Transmission Performance】 External SATA3.0 transmission interface, the theoretical transmission rate can reach the full speed of 6Gbps (SATA protocol). (The transfer rate is affected by the device configuration and SSD performance, and deviations from the theoretical data are normal.)
- 【Applicable SSD Type】Can be matched with 2TB M.2 B-key large capacity SSD, which supports size specifications: 2230, 2242, 2260, 2280
- 【Support System】WinXP/Win7/Win8/10/11 32bit/64bit/LINUX/MacOS
- 【Tips for Use】Only M.2 NGFF SATA SSD is supported, NVME and PCI-E SSD are not supported; 2 SSDs must be connected for simultaneous use; the SSD will reinitialize at the first use, please backup the hard drive data before use; When used, 2 hard drives form a JBOD.
BEYIMEI M.2 NGFF to SATA3.0 Adapter Card, Dual M.2 B-Key SSD to 6G Interface Adapter Card, SATA to Dual M.2 SATA 2.5” SSD (JBOD)
Description
Precautions for using the product
1. Be sure to back up the data on the hard disk before use. Because reorganizing the JBOD will erase all data on the hard drive.
2. To use, 2 M.2 SATA SSDs must be inserted into the riser card at the same time. SSDs that do not support PCI-E and NVME protocols. (Please read the product manual carefully for the installation method)
3. The highest speed of the adapter card under SATA3.0 is 500-550m/s. When connected to SATA2.0, the speed can only run at 200-260m/s.
4. The riser card is designed to combine 2 hard drives into a JBOD and merge them into one hard drive. This increases the hard disk capacity.
5. If the CD-ROM cannot be read without the driver, please contact us.
Packing Accessories
SATA to Dual M.2 Riser Card X1
CD X1
SATA Cable X1
User Manual X1
Screw X3
USBtype-Aポートがあるので、USBtype-Cポートが使えなくても別に問題はないのですが、せっかくあるなら使ってみたかった!という目的のみで組み込みました。
まあ、ほかの方はしないと思いますが、私のM/Bの場合x1用が正解なのに画像だけ適当に見てx2用を最初買ってしまいお蔵入り・・・文字はきちんと読まないとダメですね。きっと私だけですが両方の画像を反省の意味も込めて貼っておきます。
USBtype-Aポートがあるので、USBtype-Cポートが使えなくても別に問題はないのですが、せっかくあるなら使ってみたかった!という目的のみで組み込みました。
まあ、ほかの方はしないと思いますが、私のM/Bの場合x1用が正解なのに画像だけ適当に見てx2用を最初買ってしまいお蔵入り・・・文字はきちんと読まないとダメですね。きっと私だけですが両方の画像を反省の意味も込めて貼っておきます。
USBtype-Aポートがあるので、USBtype-Cポートが使えなくても別に問題はないのですが、せっかくあるなら使ってみたかった!という目的のみで組み込みました。
まあ、ほかの方はしないと思いますが、私のM/Bの場合x1用が正解なのに画像だけ適当に見てx2用を最初買ってしまいお蔵入り・・・文字はきちんと読まないとダメですね。きっと私だけですが両方の画像を反省の意味も込めて貼っておきます。
USBtype-Aポートがあるので、USBtype-Cポートが使えなくても別に問題はないのですが、せっかくあるなら使ってみたかった!という目的のみで組み込みました。
まあ、ほかの方はしないと思いますが、私のM/Bの場合x1用が正解なのに画像だけ適当に見てx2用を最初買ってしまいお蔵入り・・・文字はきちんと読まないとダメですね。きっと私だけですが両方の画像を反省の意味も込めて貼っておきます。
This connector has the noticeably high data throughput in tests with image and video transfer whilst still allowing you to do the more mundane chores like charge things up.
The outer casing is metal which, apart from making it more rugged, appears to be a requirement for the high data transfer rates that the new standards need.
These connectors and rugged and get the job done.
This connector has the noticeably high data throughput in tests with image and video transfer whilst still allowing you to do the more mundane chores like charge things up.
The outer casing is metal which, apart from making it more rugged, appears to be a requirement for the high data transfer rates that the new standards need.
These connectors and rugged and get the job done.
mini pic
, this is purely a convenience factory for me, as I was finding it constantly awkward to be swapping flash drives from the ports on the rear (there are plenty, they're just more awkward to access than the front ports with how I have my desk. I didn't particular need speed but I did need convenience, and it's so much neater with this being rigid and not having yet another dangling wire like some of the other C based docks. The anodised aluminium finish matches my mini pc exactly too, feels very swish!
mini pic
, this is purely a convenience factory for me, as I was finding it constantly awkward to be swapping flash drives from the ports on the rear (there are plenty, they're just more awkward to access than the front ports with how I have my desk. I didn't particular need speed but I did need convenience, and it's so much neater with this being rigid and not having yet another dangling wire like some of the other C based docks. The anodised aluminium finish matches my mini pc exactly too, feels very swish!
Materiali ottimi simili allo stile Apple.
Lo utilizzo quotidianamente e mi trovo benissimo, ne ho provati molti e questo è il migliore.
Per il prezzo vale ogni centesimo.
Prodotto consigliato
Ebrahim Al Huremi
(verified owner)P Rossouw
(verified owner)emre
(verified owner)Also, I had to unscrew and rescrew the rails on the side so I could screw it into my 2.5″ mounting tray. I am very happy that the rails on the side can easily be unscrewed.
I feel like especially for people using this with laptops this is a solid choice to go with since there is a lot you can do to ensure it can be installed properly.
MOON
(verified owner)Miguel Piette
(verified owner)Alison Ford
(verified owner)william
(verified owner)